Subtract

SCPI Command :

CALCulate:[POWer]:SWEep:POWer:MATH<CH>:SUBTract

class SubtractCls[source]

Subtract commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(math=Math.Default) → MeasRespMath[source]

# SCPI: CALCulate:[POWer]:SWEep:POWer:MATH<CH>:SUBTract
value: enums.MeasRespMath = driver.calculate.power.sweep.power.math.subtract.get(math = repcap.Math.Default)

Subtracts the operands 1 and 2 and assigns the result to the selected trace in ‘Power’ measurement mode.

param math:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Math’)

return:

subtract: T1T1| T1T2| T1T3| T1T4| T1REf| T2T1| T2T2| T2T3| T2T4| T2REf| T3T1| T3T2| T3T3| T3T4| T3REf| T4T1| T4T2| T4T3| T4T4| T4REf

set(subtract: MeasRespMath, math=Math.Default) → None[source]

# SCPI: CALCulate:[POWer]:SWEep:POWer:MATH<CH>:SUBTract
driver.calculate.power.sweep.power.math.subtract.set(subtract = enums.MeasRespMath.T1REf, math = repcap.Math.Default)

Subtracts the operands 1 and 2 and assigns the result to the selected trace in ‘Power’ measurement mode.

param subtract:

T1T1| T1T2| T1T3| T1T4| T1REf| T2T1| T2T2| T2T3| T2T4| T2REf| T3T1| T3T2| T3T3| T3T4| T3REf| T4T1| T4T2| T4T3| T4T4| T4REf

param math:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Math’)