Hreference

SCPI Command :

TRACe<CH>:[POWer]:SWEep:PULSe:THReshold:POWer:HREFerence

class HreferenceCls

Hreference commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(trace=Trace.Default) → float

# SCPI: TRACe<CH>:[POWer]:SWEep:PULSe:THReshold:POWer:HREFerence
value: float = driver.trace.power.sweep.pulse.threshold.power.hreference.get(trace = repcap.Trace.Default)

Queries the upper threshold level of the overall pulse level. The distal power defines the end of the rising edge and the start of the falling edge of the pulse. Note: This parameter is only avalaible in time measurement mode and R&S NRP-Z81 power sensors.

param trace:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trace’)

return:

hreference: float Range: 0.0 to 100.0

set(hreference: float, trace=Trace.Default) → None

# SCPI: TRACe<CH>:[POWer]:SWEep:PULSe:THReshold:POWer:HREFerence
driver.trace.power.sweep.pulse.threshold.power.hreference.set(hreference = 1.0, trace = repcap.Trace.Default)

Queries the upper threshold level of the overall pulse level. The distal power defines the end of the rising edge and the start of the falling edge of the pulse. Note: This parameter is only avalaible in time measurement mode and R&S NRP-Z81 power sensors.

param hreference:

float Range: 0.0 to 100.0

param trace:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trace’)