Adf
SCPI Commands :
[SOURce<HW>]:ADF:PRESet
[SOURce<HW>]:ADF:STATe
- class AdfCls[source]
Adf commands group definition. 16 total commands, 2 Subgroups, 2 group commands
- get_state() bool [source]
# SCPI: [SOURce<HW>]:ADF:STATe value: bool = driver.source.adf.get_state()
Activates/deactivates the VOR modulation.
- return:
state: 1| ON| 0| OFF
- preset() None [source]
# SCPI: [SOURce<HW>]:ADF:PRESet driver.source.adf.preset()
Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:VOR:STATe.
- preset_with_opc(opc_timeout_ms: int = -1) None [source]
# SCPI: [SOURce<HW>]:ADF:PRESet driver.source.adf.preset_with_opc()
Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:VOR:STATe.
Same as preset, but waits for the operation to complete before continuing further. Use the RsSmab.utilities.opc_timeout_set() to set the timeout value.
- param opc_timeout_ms:
Maximum time to wait in milliseconds, valid only for this call.
- set_state(state: bool) None [source]
# SCPI: [SOURce<HW>]:ADF:STATe driver.source.adf.set_state(state = False)
Activates/deactivates the VOR modulation.
- param state:
1| ON| 0| OFF
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.source.adf.clone()
Subgroups