Ils

SCPI Commands :

[SOURce<HW>]:ILS:PRESet
[SOURce<HW>]:ILS:STATe
[SOURce<HW>]:ILS:TYPE
class IlsCls[source]

Ils commands group definition. 96 total commands, 5 Subgroups, 3 group commands

get_state() → bool[source]
# SCPI: [SOURce<HW>]:ILS:STATe
value: bool = driver.source.ils.get_state()

Activates/deactivates the VOR modulation.

return:

state: 1| ON| 0| OFF

get_type_py() → AvionicIlsType[source]
# SCPI: [SOURce<HW>]:ILS:TYPE
value: enums.AvionicIlsType = driver.source.ils.get_type_py()

Selects the ILS modulation type.

return:

type_py: GS| LOCalize| GSLope| MBEacon

preset() → None[source]
# SCPI: [SOURce<HW>]:ILS:PRESet
driver.source.ils.preset()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:VOR:STATe.

preset_with_opc(opc_timeout_ms: int = -1) → None[source]
# SCPI: [SOURce<HW>]:ILS:PRESet
driver.source.ils.preset_with_opc()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:VOR:STATe.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmab.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.

set_state(state: bool) → None[source]
# SCPI: [SOURce<HW>]:ILS:STATe
driver.source.ils.set_state(state = False)

Activates/deactivates the VOR modulation.

param state:

1| ON| 0| OFF

set_type_py(type_py: AvionicIlsType) → None[source]
# SCPI: [SOURce<HW>]:ILS:TYPE
driver.source.ils.set_type_py(type_py = enums.AvionicIlsType.GS)

Selects the ILS modulation type.

param type_py:

GS| LOCalize| GSLope| MBEacon

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.ils.clone()

Subgroups