Llobe
SCPI Command :
[SOURce<HW>]:ILS:[GSLope]:LLOBe:[FREQuency]
- class LlobeCls[source]
Llobe commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get_frequency() float [source]
# SCPI: [SOURce<HW>]:ILS:[GSLope]:LLOBe:[FREQuency] value: float = driver.source.ils.gslope.llobe.get_frequency()
Sets the modulation frequency of the antenna lobe arranged at the bottom viewed from the air plane for the ILS glide slope modulation signal.
- return:
frequency: float Range: 100 to 200
- set_frequency(frequency: float) None [source]
# SCPI: [SOURce<HW>]:ILS:[GSLope]:LLOBe:[FREQuency] driver.source.ils.gslope.llobe.set_frequency(frequency = 1.0)
Sets the modulation frequency of the antenna lobe arranged at the bottom viewed from the air plane for the ILS glide slope modulation signal.
- param frequency:
float Range: 100 to 200