Source

SCPI Command :

[SOURce]:LFOutput<CH>:SOURce

class SourceCls

Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(lfOutput=LfOutput.Default) → LfSource

# SCPI: [SOURce]:LFOutput<CH>:SOURce
value: enums.LfSource = driver.source.lfOutput.source.get(lfOutput = repcap.LfOutput.Default)

Determines the LF signal to be synchronized, when monitoring is enabled.

param lfOutput:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘LfOutput’)

return:

source: LF1| LF2| NOISe| AM| FMPM| EXT1 | | EXT2 LF1|LF2 Selects an internally generated LF signal. NOISe Selects an internally generated noise signal. EXT1|EXT2 Selects an externally supplied LF signal AM Selects the AM signal. FMPM Selects the signal also used by the frequency or phase modulations.

set(source: LfSource, lfOutput=LfOutput.Default) → None

# SCPI: [SOURce]:LFOutput<CH>:SOURce
driver.source.lfOutput.source.set(source = enums.LfSource.AM, lfOutput = repcap.LfOutput.Default)

Determines the LF signal to be synchronized, when monitoring is enabled.

param source:

LF1| LF2| NOISe| AM| FMPM| EXT1 | | EXT2 LF1|LF2 Selects an internally generated LF signal. NOISe Selects an internally generated noise signal. EXT1|EXT2 Selects an externally supplied LF signal AM Selects the AM signal. FMPM Selects the signal also used by the frequency or phase modulations.

param lfOutput:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘LfOutput’)