Source

SCPI Command :

[SOURce<HW>]:PM<CH>:SOURce

class SourceCls

Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(generatorIx=GeneratorIx.Default) → FmSour

# SCPI: [SOURce<HW>]:PM<CH>:SOURce
value: enums.FmSour = driver.source.pm.source.get(generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for phase modulation signal.

param generatorIx:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pm’)

return:

source: LF1| LF2| NOISe| EXT1| EXT2| INTernal| EXTernal LF1|LF2 Uses an internally generated LF signal. EXT1|EXT2 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTernal Uses the internally generated signal of LF1. EXTernal Uses an external LF signal (EXT1) .

set(source: FmSour, generatorIx=GeneratorIx.Default) → None

# SCPI: [SOURce<HW>]:PM<CH>:SOURce
driver.source.pm.source.set(source = enums.FmSour.EXT1, generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for phase modulation signal.

param source:

LF1| LF2| NOISe| EXT1| EXT2| INTernal| EXTernal LF1|LF2 Uses an internally generated LF signal. EXT1|EXT2 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTernal Uses the internally generated signal of LF1. EXTernal Uses an external LF signal (EXT1) .

param generatorIx:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pm’)