Frequency

SCPI Commands :

[SOURce<HW>]:VOR:FREQuency:MODE
[SOURce<HW>]:VOR:FREQuency:STEP
[SOURce<HW>]:VOR:FREQuency

class FrequencyCls

Frequency commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_mode() → AvionicCarrFreqMode

# SCPI: [SOURce<HW>]:VOR:FREQuency:MODE
value: enums.AvionicCarrFreqMode = driver.source.vor.frequency.get_mode()

Sets the mode for the carrier frequency of the signal.

return:

mode: DECimal| ICAO DECimal Activates user-defined variation of the carrier frequency. ICAO Activates variation in predefined steps according to standard VOR transmitting frequencies (see Table ‘VOR ICAO channels and frequencies (MHz) ‘) .

get_step() → AvionicKnobStep

# SCPI: [SOURce<HW>]:VOR:FREQuency:STEP
value: enums.AvionicKnobStep = driver.source.vor.frequency.get_step()

No command help available

return:

step: No help available

get_value() → float

# SCPI: [SOURce<HW>]:VOR:FREQuency
value: float = driver.source.vor.frequency.get_value()

Sets the carrier frequency of the signal.

return:

carrier_freq: float Range: 100E3 to 6E9

set_mode(mode: AvionicCarrFreqMode) → None

# SCPI: [SOURce<HW>]:VOR:FREQuency:MODE
driver.source.vor.frequency.set_mode(mode = enums.AvionicCarrFreqMode.DECimal)

Sets the mode for the carrier frequency of the signal.

param mode:

DECimal| ICAO DECimal Activates user-defined variation of the carrier frequency. ICAO Activates variation in predefined steps according to standard VOR transmitting frequencies (see Table ‘VOR ICAO channels and frequencies (MHz) ‘) .

set_step(step: AvionicKnobStep) → None

# SCPI: [SOURce<HW>]:VOR:FREQuency:STEP
driver.source.vor.frequency.set_step(step = enums.AvionicKnobStep.DECimal)

No command help available

param step:

No help available

set_value(carrier_freq: float) → None

# SCPI: [SOURce<HW>]:VOR:FREQuency
driver.source.vor.frequency.set_value(carrier_freq = 1.0)

Sets the carrier frequency of the signal.

param carrier_freq:

float Range: 100E3 to 6E9