Step
SCPI Commands :
[SOURce<HW>]:LFOutput:SWEep:[FREQuency]:STEP:LOGarithmic
[SOURce<HW>]:LFOutput:SWEep:[FREQuency]:STEP:[LINear]
- class StepCls[source]
Step commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- get_linear() float [source]
# SCPI: [SOURce<HW>]:LFOutput:SWEep:[FREQuency]:STEP:[LINear] value: float = driver.source.lfOutput.sweep.frequency.step.get_linear()
Sets the step width for the linear sweep. For information on how the value is calculated and the interdependency with other parameters, see ‘Correlating parameters in sweep mode’
- return:
linear: float Range: 0.1 to STOP-STARt
- get_logarithmic() float [source]
# SCPI: [SOURce<HW>]:LFOutput:SWEep:[FREQuency]:STEP:LOGarithmic value: float = driver.source.lfOutput.sweep.frequency.step.get_logarithmic()
Sets the step width factor for logarithmic sweeps to calculate the frequencies of the steps. For information on how the value is calculated and the interdependency with other parameters, see ‘Correlating parameters in sweep mode’
- return:
logarithmic: float The unit is mandatory Range: 0.01 to 100, Unit: PCT
- set_linear(linear: float) None [source]
# SCPI: [SOURce<HW>]:LFOutput:SWEep:[FREQuency]:STEP:[LINear] driver.source.lfOutput.sweep.frequency.step.set_linear(linear = 1.0)
Sets the step width for the linear sweep. For information on how the value is calculated and the interdependency with other parameters, see ‘Correlating parameters in sweep mode’
- param linear:
float Range: 0.1 to STOP-STARt
- set_logarithmic(logarithmic: float) None [source]
# SCPI: [SOURce<HW>]:LFOutput:SWEep:[FREQuency]:STEP:LOGarithmic driver.source.lfOutput.sweep.frequency.step.set_logarithmic(logarithmic = 1.0)
Sets the step width factor for logarithmic sweeps to calculate the frequencies of the steps. For information on how the value is calculated and the interdependency with other parameters, see ‘Correlating parameters in sweep mode’
- param logarithmic:
float The unit is mandatory Range: 0.01 to 100, Unit: PCT